Table of Contents
Advertisement
User Manual of DS-9600/8600/7700/7600 Series NVR
10.3 Repairing Virtual Disk
Purpose:
When the disk cannot display in the HDD Information interface while the virtual disk can still show in the Array
Settings interface, you have to repair the virtual disk.
Note:
If the virtual disk is under foreground initialization, the repairing cannot be done.
Steps:
1.
Enter the Virtual Disk interface.
Menu > HDD > RAID > Virtual Disk
2.
Click
to repair the virtual disk. After successfully repairing, the following message box will pop up.
Click OK button to finish the settings.
Figure 10. 23 Repairing Virtual Disk Successfully
The disk shows again in the HDD Information interface (Menu>HDD>General).
Figure 10. 22 Virtual Disk Interface
Figure 10. 24 HDD Information Interface
166
Hide quick links:
Advertisement
Table of Contents
