Setting Sensor Alarms - HIKVISION DS-7600NI-K1/W Series User Manual

8.2 Setting Sensor Alarms

Purpose:
Set the handling action of an external sensor alarm.
Step 1 Enter Alarm Settings of System Configuration and select an alarm input.
Menu > Configuration > Alarm
Step 2 Select Alarm Input tab.
Step 3 Set up the handling action of the selected alarm input.
Check the Enable checkbox and click Settings button to set up its alarm response actions.
Step 4 (Optional) Enable the one-key disarming for local alarm input 1 (Local<-1).
1) Check the checkbox of Enable One-Key Disarming.
2) Click the Settings button to enter the linkage action settings interface.
Network Video Recorder User Manual
Figure 8-4 Alarm Status Interface of System Configuration
Figure 8-5 Alarm Input Setup Interface
115