Setting Sensor Alarms - HIKVISION HWN-2100H Series User Manual

Setting Sensor Alarms

Purpose:
Set the handling action of an external sensor alarm.
Go to Menu> Configuration > Alarm.
Select Alarm Input tab to enter Alarm Input Settings interface.
Set up the handling action of the selected alarm input.
Check Enable and click Setting to set up its alarm response actions.
(Optional) Enable the one-key disarming for local alarm input 1 (Local<-1).
1) Check Enable One-Key Disarming.
2) Click Settings to enter the linkage action settings interface.
3) Select the alarm linkage action (s) you want to disarm for local alarm input
1. The selected linkage actions include the Full Screen Monitoring, Audible
Warning, Notify Surveillance Center, Send Email and Trigger Alarm Output.
When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input settings are not
configurable.
Network Video Recorder User Manual
Alarm Status Interface of System Configuration
Alarm Input Setup Interface
96