Rebooting The Switch - HP J3100B Installation And Configuration Manual

Using the Console Interface

Rebooting the Switch

Rebooting the Switch
Rebooting the switch terminates the current console session and performs a
reset of the operating system. Some of the reasons for performing a reboot
include:
To Reboot the switch, use the Reboot Switch option in the Main menu. (If
a Manager password has been previously set, Reboot Switch appears only
if this password is entered at the beginning of the console session.)
Figure 2-4. The Reboot Switch Option in the Main Menu
2-10
Activating certain configuration changes that require a reboot
Activating port modules that have been changed since the last reboot.
(That is, where a port module has been replaced with a different type of
port module.)
Resetting statistical counters to zero
The Reboot Switch option