Menu: Viewing And Configuring Timep - HP ProCurve 2810 Series Management And Configuration Manual

Figure 9-9. The System Information Screen (Default Values)

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
2. Press (for ). The cursor moves to the System Name field.
[E] Edit
3. Use [v] to move the cursor to the Time Sync Method field.
is not already selected, use the Space bar to select TIMEP, then
4. If
TIMEP
press [v] once to display and move to the TimeP Mode field.
5. Do one of the following:
Use the Space bar to select the DHCP mode, then press [v] to move
•
the cursor to the Poll Interval field, and go to step 6.
TimeP: Viewing, Selecting, and Configuring
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
Time Protocols
9-15