Spbm Configuration Examples; Spbm With Head-End Replication Configuration Example - H3C S12500 Series Configuration Manual

SPBM configuration examples

By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are down. To bring up the
interfaces, execute the undo shutdown command.

SPBM with head-end replication configuration example

Network requirements
As shown in
Use I-SID 3001 to extend VLAN 100 across customer sites 1, 2, and 3.
•
• Use head-end replication (the default) for multicast in the SPBM network.
Assign B-VLAN 3001 to I-SID 3001.
•
Figure 10 Network diagram
Configuration procedure
1. Configure BEB 1:
# Create C-VLAN 100 and B-VLAN 3001.
<BEB1> system-view
[BEB1]vlan 100
[BEB1-vlan100]vlan 3001
[BEB1-vlan3001]quit
# Configure MST region parameters on BEB 1. Make sure B-VLAN 3001 is mapped to MSTI
4092.
[BEB1]stp region-configuration
[BEB1-mst-region]region-name spb
[BEB1-mst-region]instance 4092 vlan 3001
Figure 10, deploy an SPBM network to meet the following requirements:
36