Step
5.
Reset the TCP connection with
an MSDP peer.
Clear (S, G) entries in the SA
6.
cache.
7.
Clear statistics for an MSDP
peer.
MSDP configuration examples
PIM-SM Inter-domain multicast configuration
Network requirements
As shown in
PIM-SM 1 belongs to AS 100, and PIM-SM 2 and PIM-SM 3 belong to AS 200. Each PIM-SM domain
has at least one multicast source or receiver.
Loopback 0 is configured as the C-BSR and C-RP of the related PIM-SM domain on Switch B, Switch C,
and Switch E, respectively.
An MSDP peering relationship is set up between the RPs of the PIM-SM domains to share multicast source
information among the PIM-SM domains.
Figure
62, AS 100 and AS 200 run OSPF within each AS, and run BGP between each other.
Command
reset msdp [ all-instance |
vpn-instance vpn-instance-name ]
peer [ peer-address ]
reset msdp [ all-instance |
vpn-instance vpn-instance-name ]
sa-cache [ group-address ]
reset msdp [ all-instance |
vpn-instance vpn-instance-name ]
statistics [ peer-address ]
226
Remarks
Available in user view
Available in user view
Available in user view