Specifications; Models And Their Standard Specifications - Toshiba TOSVERT VF-S11 Instruction Manual

12. Specifications

12.1 Models and their standard specifications

Standard specifications
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA) Note 1)
Rated output/current
(A) Note 2)
Output voltage Note 3)
Overload current rating
Voltage-frequency
Allowable fluctuation
Protective method
Cooling method
Color
Built-in filter
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA) Note 1)
Rated output current
(A) Note 2)
Rated output voltage Note 3)
Overload current rating
Voltage-current
Allowable fluctuation
Protective method,
Cooling method
Color
Built-in filter
Note 1. Capacity is calculated at 220V for the 200V models and at 440V for the 400V models.
Note 2. Indicates rated output current setting when the PWM carrier frequency (parameter F300) is 4kHz or less. When ex-
ceeding 4kHz, the rated output current setting is indicated in the parentheses. It needs to be further reduced for PWM
carrier frequencies above 12 kHz.
The rated output current is reduced even further for 400V models with a supply voltage of 480V or more.
The default setting of the PWM carrier frequency is 12kHz.
Note 3. Maximum output voltage is the same as the input voltage.
Note 4. ±10% when the inverter is used continuously (load of 100%).
0.2 0.4 0.55 0.75
2002PM 2004PM 2005PM 2007PM 2015PM 2022PM 2037PM 2055PM 2075PM 2110PM 2150PM
0.6 1.3 1.4
1.5 3.3 3.7
(1.5) (3.3) (3.3) (4.4)
150 -60 seconds, 200%-0.5 second (50%-reduction value)
Self-cooling
1-phase 200V
0.2 0.4 0.75 1.5
VFS11S
2002PL 2004PL 2007PL 2015PL 2022PL 4004PL 4007PL 4015PL 4022PL 4037PL 4055PL 4075PL 4110PL 4150PL
0.6 1.3 1.8 3.0
1.5 3.3 4.8 8.0
(1.5) (3.3) (4.4) (7.9) (10.0)
3-phase 200V to 240V
150 -60 seconds, 200%-0.5 second
(50%-reduction value)
1-phase 200V to 240V – 50/60Hz
Voltage + 10 -15 Note 4),
frequency±5
IP20 Enclosed type (JEM1030)
Forced air-
Self-cooling
cooled
Munsel 5Y+8/0.5
EMI filter
Specification
3-phase 200V
1.5 2.2 3.7
VFS11
1.8 3.0 4.2 6.7
4.8 8.0 11.0 17.5
(7.9) (10.0) (16.4)
3-phase 200V to 240V
3-phase 200V to 240V - 50/60Hz
Voltage + 10%, -15% Note 4), frequency ±5%
IP20 Enclosed type (JEM1030)
Munsel 5Y+8/0.5
Basic filter
Specification
2.2 0.4 0.75 1.5 2.2
4.2 1.1 1.8 3.1 4.2
11.0 1.5 2.3 4.1 5.5
(1.5) (2.1) (3.7) (5.0)
3-phase 380V to 500V
150 -60 seconds, 200% -0.5 second (50%-reduction value)
3-phase 380V to 500V - 50/60Hz
Voltage + 10%, -15% Note 4), frequency ±5%
IP20 Enclosed type (JEM1030)
L-1
E6581158
5.5 7.5 11
10 13 21
27.5 33 54
(25.0) (33) (49)
Forced air-cooled
3-phase 400V
3.7 5.5 7.5 11
VFS11
7.2 11 13 21
9.5 14.3 17.0 27.7
(8.6) (13.0) (17.0) (25.0)
Forced air-cooled
Munsel 5Y+8/0.5
EMI filter
15
25
66
(60)
15
25
33
30
12