Toshiba TOSVERT VF-S11 Instruction Manual page 27

1.3.3 How to open the front (terminal board) cover
To wire the terminal board, remove the front lower cover in line with the steps given below.
(1)
Turn the locking screw on the right
side of the
counterclockwise to align the dot on
the screw with the unlock position
mark (upper side). To avoid damage
to the screw, Do not apply excessive
force to turn the screw more than 90
degrees.
front panel 90˚
A-15
(2)
ull the front panel toward you
and swing it open to the left.
E6581158
1