Toshiba TOSVERT VF-S11 Instruction Manual page 65

E6581158
: This mode allows you to jog the motor by controlling the
Panel jog mode
operation from the operation panel.
This mode is hidden by default.
To use the panel jog mode, set the parameter to .
Here is the sequence in which modes change each time you press the MODE key.
Standard monitor
mode
MODE
MODE
Setting monitor
Status monitor
mode
mode
4
Panel jog mode
MODE MODE
Note: When the inverter is in operation (RUN lamp is blinking) or when an operation command is issued (RUN lamp is lit),
the inverter cannot be switched to panel jog mode.
D-2