How To Set Extended Parameters - Toshiba TOSVERT VF-S11 Instruction Manual

4.1.2

How to set extended parameters

The VF-S11 has extended parameters to allow you to make full use of its functions.
All extended parameters are expressed with
Basic parameters
Press the MODE key once and use the
to select from the basic parameters.
[Steps in key entry for extended parameters]
: switches to the setting monitor mode.(Displays
MODE
: Selects "
: The first extended parameter "
: Selects the extended parameter whose setting needs to be changed.
: Reads the programmed parameter setting.
: Changes the parameter setting.
Saves the changed value of the extended parameter setting.
Pressing the
and three digits.
ENT
MODE
key
" from basic parameters.
" (Low-speed signal output frequency) is displayed.
key instead of the
MODE
D-5
Press the key or the
change the set value. Pressing
the ENTER key allows the reading
of parameter setting.
)
* See 11.3 for extended
parameters.
key moves back to the previous status.
E6581158
4
key to