An example of the connection of the open collector OUT terminal
• Output terminal setting
6
Output of the low-speed signal (ON signal) between the RY and RC terminals is the factory default
setting of the output terminal selection parameter. This setting must be changed to invert the polarity of
the signal.
[Parameter setting]
Title
Output terminal selection 1A (RY-RC)
Set
to output to OUT-NO terminals.
An example of the connection of the relay output terminals
Function
0-255
(See Section 11, K-18)
F-2
Adjustment range
Default setting
4 (ON signal)
5 (OFF signal)
E6581158
or