Toshiba TOSVERT VF-S11 Instruction Manual page 178

6.21.3 Displaying the rotational speed of the motor or the line
• Function
The value obtained by multiplying the displayed frequency by the
follows:
Value displayed = Monitor-displayed or parameter-set frequency ×
1)
6
2)
speed
: Frequency free unit magnification
: Inclination characteristic of free unit display
: Bias of free unit display
The frequency or any other item displayed on the monitor can be converted freely into the rotational
speed of the motor, the operating speed of the load, and so on.
Displaying the motor speed
To switch the display mode from 60Hz (default setting) to 1800min
motor)
Displaying the speed of the loading unit
To switch the display mode from 60Hz (default setting) to 6m/min
Note: This parameter displays the inverter output frequency as the value obtained by multiplying it by a
positive number. Even when the actual speed of the motor changes according to the particular
changes in load, the output frequency will always be displayed.
-1
-1
F-76
E6581158
-set value will be displayed as
(the rotating speed of the 4P
(the speed of the conveyer)