Toshiba TOSVERT VF-S11 Instruction Manual page 70

Key operated
or
MODE
MODE
If there is anything you do not understand during this operation, press the
start over from the step of
4.1.4 Searching for a history of changes, using the history
function (
History function (
Automatically searches for 5 latest parameters that are programmed with values different from the
standard default setting and displays them in the
within this group
Notes on operation
• If no history information is stored, this parameter is skipped and the next parameter "
played.
•
and
LED display
Press the ENTER key to enable the user parameter automatic edit
function.
Searches for parameters that are different in value from the standard
default setting and displays those parameters. Press the ENTER key
or the key to change the parameter displayed. (Pressing the
↓
moves the search in the reverse direction).
Press the ENTER key to display the set value.
Press the key and
Press the ENTER key to save the changed value. The parameter
⇔
name and the programmed value will flash on and off alternately.
After the change has been saved, "
Use the same steps as those given above to display parameters that
you want to search for or change setting with the
When .
A search can be canceled by pressing the MODE key. Press the
MODE key once while the search is underway to return to the display
↓
of parameter setting mode.
After that you can press the MODE key to return to the status
↓
monitor mode or the standard monitor mode (display of operation
frequency).
display.
)
):
.
are added respectively to th efirst and last parameters in a history of changes.
D-7
Operation
key to change set value.
" is displayed.
appears again, the search is ended.
MODE
. Parameter setting can also be changed
E6581158
key
key and key.
4
key several times to
" is dis-