Toshiba TOSVERT VF-S11 Instruction Manual page 9

II. Introduction
Thank you for your purchase of the Toshiba "TOSVERT VF-S11" industrial inverter.
Please be informed that CPU version will be frequently upgraded.
Features
1. Built-in noise filter
1) All models in both the 200V and 400V series have a noise filter inside.
2) Compliant with European CE marking standard
3) Reduces space requirements and cuts down on time and labor needed in wiring.
2. Simple operation
1) Automatic functions (torque boost acceleration/deceleration time, function programming)
Just by wiring the motor to the power supply allows instant operation without the need to program pa-
rameters.
2) The potentiometer dial and the RUN/STOP button allow easy operation.
3. Superior basic performance
1) 200% or more starting torque
2) Smooth operation : Reduced rotation ripple through the use of Toshiba's unique dead-band compen-
3) Built-in current surge suppression circuit : Can be safely connected even if power load is low.
4) Maximum 500Hz high frequency output : Optimum for use with high speed motors such as those in
5) Maximum carrier frequency : 16kHz quiet operation
Toshiba's unique PWM control reduces noise at low carrier.
4. Globally compatible
1) Compatible with 240V and 500V power supplies
2) Conforms to CE marking and with UL, CSA and C-Tick.
3) Sink/source switching of control input/output.
5. Options allow use with a wide variety of applications
• Internal communications devices (RS485, Modbus RTU, DeviceNET, LonWorks)
• Extension panel/Parameter writer
• DIN rail kit
• Foot-mounted type noise reduction filter (EMC directive: For class A and class B)
• Other options are common to all models
sation.
lumber machinery and milling machines.
7
E6581158
II