Toshiba TOSVERT VF-S11 Instruction Manual page 131

<Examples of jog run>
RES-CC (JOG) ON + F-CC ON: Forward jog run
RES-CC (JOG) ON + R-CC ON: Reverse jog run
( Normal operation frequency signal input + F-CC ON: Forward run, Normal operation frequency signal input +
R-CC ON: Reverse run )
Set frequency
ST-CC
F-CC
R-CC
RES-CC
(
Normal operation frequency
setting signal input
• The jog run setting terminal (RES-CC) is enabled when the pperation frequency is below the jog run
frequency.
This connection does not function at an operation frequency exceeding the jog run frequency.
• The motor can be operated in jog mode while the jog run setting terminals are connnected (RES-CC).
• Jog run has priority, even when a new operation command is given during operation.
• Even for
= or
• No limits are imposed to the jog run frequency by the upper-limit frequency (parameter
Panel jog mode (if
• When the inverter is in panel jog mode, pressing the
key displays
• When
is displayed, the inverter will be placed in forward jog run mode as long as the
key is held down.
• When
is displayed, the inverter will be placed in reverse jog run mode as long as the
key is held down.
• During jog run, the direction of rotation can be changed using the
key to run the motor in the forward direction, or press the
• If you press and hold down the
be displayed.
Reverse
Forward
Reverse
0
= )
, an emergency DC braking becomes enabled when setting
is set to )
.
key for 20 seconds or more, the key failure alarm "
F-29
Forward
key displays
and
key to run it in the reverse direction.
E6581158
6
= .
).
, while pressing the
keys. Press the
" will