6.3
Terminal function selection
6.3.1
Keeping an input terminal function always active (ON)
: Always-active function selection
• Function
This parameter specifies an input terminal function that is always to be kept active (ON). (Only one
function selectable)
Parameter setting
Title
Always-active function selection
6.3.2
Modifying input terminal functions
: Input terminal selection 1 (F)
: Input terminal selection 2 (R)
: Input terminal selection 3 (RES)
: Input terminal selection 4 (S1)
: Input terminal selection 5 (S2)
: Input terminal selection 6 (S3)
: Input terminal selection 7 (VIB)
: Input terminal selection 8 (VIA)
Function
0-64 (See section 11, K-15)
F-7
Adjustment range
Default setting
E6581158
1 (Standby)
6