Toshiba TOSVERT VF-S11 Instruction Manual page 69

Example of parameter setting
Steps in setting are as follows
(Example of changing the dynamic braking selection
Key operated
4
4.1.3
Automatically searches for only those parameters that are programmed with values different from the
standard default setting and displays them in the user parameter group
changed within this group.
Notes on operation
• If you reset a parameter to its factory default, the parameter will no longer appear in
How to search and reprogram parameters
The operations of search and resetting of parameters are as follows.
Key operated
LED display
.
MODE
⇔
If there is anything you do not understand during this operation, press the MODE key several times to
start over from the step of
Search and resetting of changed parameters (
LED display
MODE
from 0 to 1.)
Displays the operation frequency (operation stopped).
(When standard monitor display selection
frequency])
The first basic parameter "
Press either the or the
.
Press the ENTER key to display the first extended parameter
.
Press the key to change to the dynamic braking selection
Pressing the ENTER key allows the reading of parameter setting.
Press the key to change the dynamic braking selection from
.
Pressing the ENTER key alternately flashes on and off the parameter
and changed value and allows the save of those values.
display.
Displays the operation frequency (operation stopped).
(When standard monitor display selection
frequency])
The first basic parameter "
Press or key to select
D-6
Operation
= [Operation
" (history function) is displayed.
to change to the parameter group
. Parameter setting can also be
.
Operation
= [Operation
" (history function) is displayed.
.
E6581158
.
to
)