Toshiba TOSVERT VF-S11 Instruction Manual page 206

Note 6: The integrated amounts of input and output power will be reset to zero, if you press and hold down the
Note 7: Past rip records are displayed in the following sequence: 1 (latest trip record) ⇔2⇔3⇔4 (oldest trip rec-
Note 8: The life alarm is displayed based on the value calculated from the annual average ambient temperature,
Note 9: The cumulative operation time increments only when the machine is in operation.
Note 10: At the occurrence of a trip, maximum values are not always recorded and displayed for reasons of de-
8
If = : The bar representing OUT-NO is displayed.
If = : The bar representing OUT-NO is not displayed.
key for 3 seconds or more when power is off or when the input terminal function CKWH (input ter-
minal function: 51) is turned on or displayed.
ord). If no trip occurred in the past, the message "
1, 2, 3 or 4 can be displayed by pressing the
information, see 8.1.2.
operation time and load current specified using
on a rough estimation.
tecting time.
" will be displayed. Details on past trip record
key when past trip 1, 2, 3 or 4 is displayed. For more
. Use this alarm as a guide only, since it is based
H-10
E6581158