Standard Default Setting - Toshiba TOSVERT VF-S11 Instruction Manual

5.6

Standard default setting

: Default setting
•
Function
Allows setting of all parameters to the standard default setting, etc. at one time.
Note that
Title
Default setting
This function will be displayed as 0 during reading on the right. This previous setting is displayed.
Example:
cannot be set during the inverter operating. Always stop the inverter first and then program.
Programmed value
Default setting (
Setting to
When 3 is programmed, <
and displayed the original indication 0.0. Trip history data will be cleared at this time.
Trip clear ( =
Setting to
The parameter does not change.
Cumulative operation time clear (
Setting to
Cumulative operation time clear (
Setting to
us.
, , , and
Function
= )
will return all parameters to the standard values that were programmed at the factory.
will be displayed for a short time after setting and will then be erased
)
initializes the past four sets of recorded error history data.
= )
resets the cumulative operation time to the initial value (zero).
= )
clears the trips when an
E-13
will not be reset to their factory default settings.
Adjustment range
0: -
1: 50Hz default setting
2: 60Hz default setting
3: Standard default setting (Initializa-
tion)
4: Trip record clear
5: Cumulative operation time clear
6: Initialization of type information
7: Save user-defined parameters
8: Call user-defined parameters
9: Cumulative fan operation time rec-
ord clear
format error occurs. But if the
E6581158
Default setting
0
5
displayed, call