Toshiba TOSVERT VF-S11 Instruction Manual page 78

[Setting methods]
Key operated LED display
.
MODE
⇔
Note 1: The same characteristic can be obtained by setting the V/F control mode selection parameter
(vector control) and the auto-tuning parameter
Note 2: Setting to automatically programs
3) Energy-saving operation
Automatic torque boost parameter
When the automatic control parameter
always passes a current appropriate to the load for energy saving.
[Setting methods]
Key operated LED display
.
MODE
⇔
Note 1: The same characteristic can be obtained by setting the V/F control mode selection parameter
(automatic energy saving) and the auto-tuning parameter
Note 2: When is set to
Displays the operation frequency. (Perform during operation
stopped.)
(When standard monitor display selection
eration frequency])
The first basic parameter "
Press the key to change the parameter to
boost)
Pressing the ENTER key allows the reading of parameter setting.
Press the key to change the parameter to
control + auto-tuning). (Programmed value at the right and the his-
tory at the left)
Press the ENTER key to save the changed parameter.
parameter are displayed alternately.
to .
is set to (automatic energy saving + auto-tuning)
is set to (automatic torque boost + auto-tuning), the inverter
Displays the operation frequency. (Perform during operation stopped.)
(When standard monitor display selection
eration frequency])
The first basic parameter "
Press the key to change the parameter to
boost)
Pressing the ENTER key allows the reading of parameter setting.
Change the parameter setting to
using the key.
Press the ENTER key to save the changed parameter.
parameter are displayed alternately.
, is automatically set to
E-5
Operation
is set to
" (history function) is displayed.
(automatic torque
(sensorless vector
⇒ See 5.12
to (auto-tuning).
Operation
is set to
" (history function) is displayed.
(automatic torque
(energy saving + auto-tuning),
to (auto-tuning).
.
E6581158
[Op-
and the
to
5
[Op-
and the
to