3.4.2.6
Configuring the DSP Templates
The 'DSP Templates' page allows you to assign up to two DSP templates to the device. In
addition, you can define the percentage of DSP resources allocated per DSP template.
To select DSP templates, take these 5 steps:
Open the 'DSP Templates' page (Configuration tab > Media Settings menu > DSP
1.
Templates page item).
Select an index row by clicking the corresponding 'Index' radio button.
2.
Click Edit, and then in the 'DSP Template Number' field, enter the desired DSP
3.
template number.
Click Apply to save your settings.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230.
5.
Notes:
Parameter
DSP Template Number
[DSPVersionTemplateNumber]
DSP Resources Percentage
SIP User's Manual
Figure 3-45: DSP Templates Page
•
If you delete all the table entries, the device uses the default DSP
template.
•
For a description of the Web interface's table command buttons (e.g.,
Duplicate and Delete), refer to ''Working with Tables'' on page 30.
Table 3-18: DSP Templates Parameters
Determines the number of the DSP template load. Each load has
a different coder list, channel capacity, and supported features.
For the list of supported DSP template numbers (coders and
channel capacity), refer to the device's Release Notes. The
default is 0.
Resource percentage used for the specified template.
Description
80
Mediant 2000
Document #: LTRT-68808