AudioCodes Mediant 2000 User Manual page 101

SIP User's Manual
Note: If you are logged into the Web interface as the Security Administrator, both Web
user accounts are displayed on the 'Web User Accounts' page (as shown above). If
you are logged in with the secondary user account, only the details of the secondary
account are displayed on the page.
To change the access level of the secondary account:
2.
From the 'Access Level' drop-down list, select the new access level.
a.
Click Change Access Level; the new access level is applied immediately.
b.
Notes:
To change the user name of an account, perform the following:
3.
In the field 'User Name', enter the new user name (maximum of 19 case-sensitive
a.
characters).
Click Change User Name; if you are currently logged into the Web interface with
b.
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new user name.
To change the password of an account, perform the following:
4.
In the field 'Current Password', enter the current password.
a.
In the fields 'New Password' and 'Confirm New Password', enter the new
b.
password (maximum of 19 case-sensitive characters).
Click Change Password; if you are currently logged into the Web interface with
c.
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new password.
Notes:
Version 5.6
•
The access level of the primary Web user account is 'Security
Administrator', which cannot be modified.
•
The access level of the secondary account can only be modified by the
primary account user or a secondary account user with 'Security
Administrator' access level.
•
For security, it's recommended that you change the default user name
and password.
•
A Web user with access level 'Security Administrator' can change all
attributes of all the Web user accounts. Web users with an access level
other than 'Security Administrator' can only change their own password
and user name.
•
To reset the two Web user accounts' user names and passwords to
default, set the ini file parameter ResetWebPassword to 1.
•
To access the Web interface with a different account, click the Log off
button located on the toolbar, click any button or page item, and then re-
access the Web interface with a different user name and password.
•
You can set the entire Web interface to read-only (regardless of Web
user account's access level), by using the ini file parameter
DisableWebConfig (refer to ''Web and Telnet Parameters'' on page 273).
•
Access to the Web interface can be disabled, by setting the ini file
parameter DisableWebTask to 1. By default, access is enabled.
•
You can define additional Web user accounts using a RADIUS server
(refer to the Product Reference Manual).
•
For secured HTTP connection (HTTPS) (refer to the Product Reference
Manual).
101
3. Web-Based Management
November 2008