AudioCodes Mediant 2000 User Manual page 304

Parameter
TDMBusPSTNAutoClockR
evertingEnable
TDMBusEnableFallback
TDMBusFallbackClock
TDMBusNetrefSpeed
LineCode
LineCode_x
EnableCallingPartyCatego
ry
BChannelNegotiation
NFASGroupNumber_x
DChConfig_x
ISDNNFASInterfaceID_x
CASTableIndex_x
CASFileName_0
CASFileName_1
CASFileName_7
CASTablesNum
IdleABCDPattern
IdlePCMPattern
SIP User's Manual
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
Defines the automatic fallback of the clock.
[0] = Manual (default)
[1] = Auto Non-Revertive
[2] = Auto Revertive
Selects the fallback clock source on which the device synchronizes in
the event of a clock failure.
[4] = PSTN Network (default)
[8] = H.110A
[9] = H.110B
[10] = NetRef1
[11] = NetRef2
Determines the NetRef frequency (for both generation and
synchronization).
[0] = 8 kHz (default)
[1] = 1.544 MHz
[2] = 2.048 MHz
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
Same as the description for parameter LineCode, but for a specific
trunk ID (where 0 depicts the first trunk).
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 207.
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 207.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with one or
more of the device trunks using the parameter CASTableIndex_x.
1 to 8. Indicates how many CAS protocol configurations files are
loaded.
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
304
Description
Document #: LTRT-68808
Mediant 2000