AudioCodes Mediant 2000 User Manual page 300

Media sip gateway
Hide thumbs Also See for Mediant 2000:
Table of Contents

Advertisement

Parameter
TelProfile
SIP User's Manual
For a description of using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257.
This ini file table parameter configures the Tel Profile Settings
table. The format of this parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed*, TelProfile_JitterBufMinDelay*,
TelProfile_JitterBufOptFactor*, TelProfile_IPDiffServ*,
TelProfile_SigIPDiffServ*, TelProfile_DtmfVolume,
TelProfile_InputGain, TelProfile_VoiceVolume, N/A, N/A,
TelProfile_EnableDigitDelivery, TelProfile_EnableEC, N/A, N/A,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia*,
TelProfile_ProgressIndicator2IP*,
TelProfile_TimeForReorderTone*, N/A, N/A, N/A;
[\TelProfile]
* = Indicates common parameters used in both IP and Tel profiles.
TelPreference = determines the priority of the Profile (1 to 20,
where 20 is the highest preference). If both IP and Tel profiles
apply to the same call, the coders and other common parameters
(indicated with an asterisk) of the preferred Profile are applied to
that call. If the preference of the Tel and IP profiles is identical, the
Tel Profile parameters are applied.
For example:
[TelProfile]
TelProfile 1 =
FaxProfile,1,1,1,40,13,22,33,$$,$$,$$,0,0,0,1,0,0,$$,0,$$,$$,$$,$
$,$$;
TelProfile 2 =
ModemProfile,2,2,0,40,13,$$,$$,$$,$$,$$,$$,$$,$$,0,0,0,$$,0,$$,
$$,$$,$$;
[\TelProfile]
Notes:
This parameter can appear up to 9 times (i.e., indices 1-9).
Two adjacent dollar signs ('$$') indicates that the parameter's
default value is used.
The TelProfile index can be used in the Trunk Group table
(TrunkGroup parameter).
The 'Profile Name' assigned to a Profile index must enable
users to identify it intuitively and easily.
To configure the Tel Profile table using the Web interface, refer
to ''Tel Profile Settings'' on page 192.
For a description of using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257.
300
Description
Document #: LTRT-68808
Mediant 2000

Advertisement

Table of Contents
loading

Table of Contents