Figure 3-50: Web User Accounts Page (For Users With 'Security Administrator' Privileges); Table 3-22: Web User Accounts Access Levels And Privileges; Table 3-23: Default Attributes For The Web User Accounts - AudioCodes Mediant 2000 User Manual

Table 3-22: Web User Accounts Access Levels and Privileges

Access Level
Security
Administrator
Administrator
User Monitor
No Access
* The numeric representation of the access level is used only to define accounts in a RADIUS server
(the access level ranges from 1 to 255).
The default attributes for the two Web user accounts are shown in the following table:

Table 3-23: Default Attributes for the Web User Accounts

Account / Attribute
Primary Account
Secondary Account
To change the Web user accounts attributes, take these 4 steps:
Open the 'Web User Accounts' page (Configuration tab > Security Settings menu >
1.
Web User Accounts page item).

Figure 3-50: Web User Accounts Page (for Users with 'Security Administrator' Privileges)

SIP User's Manual
Numeric
Representation*
200
100
50
0
User Name
(Case-Sensitive) (Case-Sensitive)
Admin
User
100
Privileges
Read / write privileges for all pages.
read / write privileges for all pages except
security-related pages, which are read-only.
No access to security-related and file-loading
pages; read-only access to the other pages.
This read-only access level is typically applied
to the secondary Web user account.
No access to any page.
Password
Admin Security Administrator
Note: The Access Level cannot
be changed for this account
type.
User
Mediant 2000
Access Level
User Monitor
Document #: LTRT-68808