Configuring The Web And Telnet Access List; Figure 3-51: Web & Telnet Access List Page - Add New Entry; Figure 3-52: Web & Telnet Access List Table - AudioCodes Mediant 2000 User Manual

3.4.6.2

Configuring the Web and Telnet Access List

The 'Web & Telnet Access List' page is used to define up to ten IP addresses that are
permitted to access the device's Web and Telnet interfaces. Access from an undefined IP
address is denied. If no IP addresses are defined, this security feature is inactive and the
device can be accessed from any IP address.
The Web and Telnet Access List can also be defined using the ini file parameter
WebAccessList_x (refer to ''Web and Telnet Parameters'' on page 273).
To add authorized IP addresses for Web and Telnet interfaces
access, take these 4 steps:
Open the 'Web & Telnet Access List' page (Configuration tab > Security Settings
1.
menu > Web & Telnet Access List page item).
Figure 3-51: Web & Telnet Access List Page - Add New Entry
To add an authorized IP address, in the 'Add a New Authorized IP Address' field, enter
2.
the required IP address, and then click Add New Address; the IP address you
entered is added as a new entry to the 'Web & Telnet Access List' table.
To delete authorized IP addresses, select the Delete Row check boxes corresponding
3.
to the IP addresses that you want to delete, and then click Delete Selected
Addresses; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230.
4.
SIP User's Manual
Figure 3-52: Web & Telnet Access List Table
102
Mediant 2000
Document #: LTRT-68808