AudioCodes Mediant 2000 User Manual page 216

Parameter
Forward on Do Not Disturb Digit Pattern
(External)
[DigitPatternForwardOnDNDExt]
Forward on No Reason Digit Pattern
(External)
[DigitPatternForwardNoReasonExt]
Internal Call Digit Pattern
[DigitPatternInternalCall]
External Call Digit Pattern
[DigitPatternExternalCall]
Disconnect Call Digit Pattern
[TelDisconnectCode]
Digit To Ignore Digit Pattern
[DigitPatternDigitToIgnore]
Message Waiting Indication (MWI)
MWI Off Digit Pattern
[MWIOffCode]
MWI On Digit Pattern
[MWIOnCode]
MWI Suffix Pattern
[MWISuffixCode]
MWI Source Number
[MWISourceNumber]
SMDI
Enable SMDI
[SMDI]
SIP User's Manual
Description
Determines the digit pattern used by the PBX to indicate
'call forward on do not disturb' when the original call is
received from an external line (not an internal extension).
The valid range is a 120-character string.
Determines the digit pattern used by the PBX to indicate
'call forward with no reason' when the original call is
received from an external line (not an internal extension).
The valid range is a 120-character string.
Determines the digit pattern used by the PBX to indicate
an internal call.
The valid range is a 120-character string.
Determines the digit pattern used by the PBX to indicate
an external call.
The valid range is a 120-character string.
Determines a digit pattern that when received from the
Tel side, indicates the device to disconnect the call.
The valid range is a 25-character string.
A digit pattern that if received as Src (S) or Redirect (R)
numbers is ignored and not added to that number.
The valid range is a 25-character string.
Determines the digit code used by the device to notify the
PBX that there aren't any messages waiting for a specific
extension. This code is added as prefix to the dialed
number.
The valid range is a 25-character string.
Determines the digit code used by the device to notify the
PBX of messages waiting for a specific extension. This
code is added as prefix to the dialed number.
The valid range is a 25-character string.
Determines the digit code used by the device as a suffix
for 'MWI On Digit Pattern' and 'MWI Off Digit Pattern'.
This suffix is added to the generated DTMF string after
the extension number.
The valid range is a 25-character string.
Determines the calling party's phone number used in the
Q.931 MWI SETUP message to PSTN. If not configured,
the channel's phone number is used as the calling
number.
Enables Simplified Message Desk Interface (SMDI)
interface on the device.
[0] Disable = Normal serial (default).
[1] Enable (Bellcore)
[2] Ericsson MD-110
[3] NEC (ICS)
Note: When the RS-232 connection is used for SMDI
messages (Serial SMDI), it cannot be used for other
216
Mediant 2000
Document #: LTRT-68808