Using The Home Page; Figure 3-26: Areas Of The Home Page; Table 3-6: Description Of The Areas Of The Home Page - AudioCodes Mediant 2000 User Manual

3.3.8

Using the Home Page

The 'Home' page provides you with a graphical display of the device's front panel,
displaying color-coded status icons for monitoring the functioning of the device. By default,
the 'Home' page is displayed when you access the device's Web interface. When you are
configuring the device (in a configuration page), you can always return to the 'Home' page,
by simply clicking the Home icon on the toolbar. The 'Home' page also displays general
device information (in the 'General Information' pane) such as the device's IP address and
firmware version.
To access the Home page, take this step:
On the toolbar, click the Home
Note:
The table below describes the areas of the 'Home' page.

Table 3-6: Description of the Areas of the Home Page

Item# /
Label
Displays the highest severity of an active alarm raised (if any) by the device:
1
Green = No alarms
Red = Critical alarm
Orange = Major alarm
Yellow = Minor alarm
You can also view a list of active alarms in the 'Active Alarms' page (refer to "Viewing
Active Alarms" on page 245), by clicking the Alarms area.
Blade Activity icon:
2
(green): Initialization sequence terminated successfully.
Blade Fail icon:
3
(gray): Normal functioning.
(red): Blade failure.
SIP User's Manual

Figure 3-26: Areas of the Home Page

The number of channels displayed in the 'Home' page depends on the
device's hardware configuration.
icon; the 'Home' page is displayed:
Description
46
Mediant 2000
Document #: LTRT-68808