Table 3-25: General Security Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
HTTP Authentication Mode
[WebAuthMode]
Secured Web Connection (HTTPS)
[HTTPSOnly]
General RADIUS Settings
Enable RADIUS Access Control
[EnableRADIUS]
Use RADIUS for Web/Telnet Login
[WebRADIUSLogin]
RADIUS Authentication Server IP
Address
[RADIUSAuthServerIP]
RADIUS Authentication Server Port
[RADIUSAuthPort]
Version 5.6

Table 3-25: General Security Parameters

Determines the authentication mode for the Web interface.
[0] Basic Mode = Basic authentication (clear text) is used
(default).
[1] Digest When Possible = Digest authentication (MD5) is
used.
[2] Basic if HTTPS, Digest if HTTP = Digest authentication
(MD5) is used for HTTP, and basic authentication is used
for HTTPS.
Note: When RADIUS login is enabled (i.e., the parameter
WebRADIUSLogin is set to 1), basic authentication is forced.
Determines the protocol types used to access the Web
interface.
[0] Disable = HTTP and HTTPS (default).
[1] Enable = Unencrypted HTTP packets are blocked.
Determines whether the RADIUS application is enabled.
[0] Disable = RADIUS application is disabled (default).
[1] Enable = RADIUS application is enabled.
Uses RADIUS queries for Web and Telnet interface
authentication.
[0] Disable (default).
[1] Enable.
When enabled, logging in to the device's Web and Telnet
embedded servers is performed via a RADIUS server. The
device contacts a predefined server and verifies the given user
name and password pair against a remote database, in a
secure manner.
Notes:
The parameter EnableRADIUS must be set to 1.
RADIUS authentication requires HTTP basic authentication,
meaning the user name and password are transmitted in
clear text over the network. Therefore, it's recommended to
set the parameter HttpsOnly to 1 to force the use of HTTPS,
since the transport is encrypted.
If using RADIUS authentication when logging in to the CLI,
only the primary Web User Account (which has Security
Administration access level) can access the device's CLI
(refer to ''Configuring the Web User Accounts'' on page 99).
IP address of the RADIUS authentication server.
Port number of the RADIUS authentication server.
The default value is 1645.
111
3. Web-Based Management
Description
November 2008