SIP User's Manual
Parameter
DigitPatternInternalCall
DigitPatternExternalCall
TelDisconnectCode
DigitPatternDigitToIgnore
4.4.10 PSTN Parameters
The PSTN-related ini file configuration parameters are described in the table below.
Parameter
PCMLawSelect
ProtocolType
ProtocolType_x
TraceLevel
FramingMethod
FramingMethod_x
TerminationSide
TerminationSide_x
ClockMaster
ClockMaster_x
TDMBusClockSource
TDMBusPSTNAutoClockE
nable
TDMBusLocalReference
AutoClockTrunkPriority
Version 5.6
For a description of this parameter, refer to ''Configuring
the Voice Mail (VM) Parameters'' on page 214.
For a description of this parameter, refer to ''Configuring
the Voice Mail (VM) Parameters'' on page 214.
For a description of this parameter, refer to ''Configuring
the Voice Mail (VM) Parameters'' on page 214.
For a description of this parameter, refer to ''Configuring
the Voice Mail (VM) Parameters'' on page 214.
Table 4-10: PSTN ini File Parameters
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
Same as the description for parameter ProtocolType, but for a specific
trunk ID (x = 0 - 7).
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
Same as the description for parameter FramingMethod, but for a
specific trunk ID (x = 0 - 7).
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
Same as the description for parameter TerminationSide, but for a
specific trunk ID (x = 0 - 7).
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
Same as the description for parameter ClockMaster, but for a specific
trunk ID (x = 0 - 7).
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
For a description of this parameter, refer to "Configuring the TDM Bus
Settings" on page 218.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
303
4. ini File Configuration
Description
Description
November 2008