4.4.14 Auxiliary / Configuration Files Parameters; Table 4-14: Auxiliary / Configuration Ini File Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
DisableRTCPRandomize
RTCPXRESCTransportType
RTCPXREscIP
RTCPXRReportMode

4.4.14 Auxiliary / Configuration Files Parameters

The configuration files (i.e., auxiliary files) can be loaded to the device using the Web
interface or a TFTP session (refer to ''Auxiliary Files'' on page 231). Before you load them
to the device, you need to specify these files in the ini file and whether they must be stored
in the non-volatile memory. The table below lists the ini file parameters associated with
these auxiliary files:

Table 4-14: Auxiliary / Configuration ini File Parameters

Parameter
CallProgressTonesFilename
CASFileName
CASFileName_x
CASTablesNum
VoicePromptsFileName
PrerecordedTonesFileName
CasTrunkDialPlanName
Version 5.6
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 71.
Determines the transport layer used for outgoing SIP dialogs
initiated by the device to the RTCP-XR Collection Server.
[-1] Not Configured (default)
[0] UDP
[1] TCP
[2] TLS
Note: When set to 'Not Configured', the value of the parameter
SIPTransportType is used.
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 71.
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 71.
The name of the file containing the Call Progress Tones
definitions. Refer to the Product Reference Manual for
additional information on how to create and load this file.
This is the name of the file containing specific CAS protocol
definition (such as 'E_M_WinkTable.dat'). These files are
provided to support various types of CAS signaling.
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the
CAS protocol. It is possible to define up to eight different CAS
files by repeating this parameter. Each CAS file can be
associated with one or more of the device trunks using the
parameter CASTableIndex_x.
Number 1 to 8. Specifies how many CAS configuration files
are loaded.
The name (and path) of the file containing the Voice Prompts
definitions. Refer to the Product Reference Manual for
additional information on how to create and load this file.
The name (and path) of the file containing the Prerecorded
Tones.
The Dial Plan name (up to 11-character strings) that is used
on the specific trunk.
331
4. ini File Configuration
Description
Description
November 2008