Table 3-2: Ini File Parameters For Changing Logo Image; Table 3-3: Ini File Parameters For Replacing Logo With Text - AudioCodes Mediant 2000 User Manual
Media sip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
SIP User's Manual
Tip:
To replace the default logo with a different image using the ini file,
take these 3 steps:
Place your corporate logo image file on the TFTP server in the same folder where the
1.
device's ini file is located.
Configure the ini file parameters as described in the table below. (For a description on
2.
using the ini file, refer to ''Modifying an ini File'' on page 259.)
Load the ini file to the device using BootP / TFTP (i.e., not through the Web interface).
3.
For detailed information on the BootP/TFTP application, refer to the Product Reference
Manual.
Table 3-2: ini File Parameters for Changing Logo Image
Parameter
LogoFileName
LogoWidth
3.3.6.1.2 Replacing the Corporate Logo with Text
The corporate logo can be replaced with a text string instead of an image. To replace
AudioCodes' default logo with a text string using the ini file, configure the ini file parameters
listed in the table below. (For a description on using the ini file, refer to ''Modifying an ini
File'' on page 259.)
Table 3-3: ini File Parameters for Replacing Logo with Text
Parameter
UseWebLogo
WebLogoText
Note:
Version 5.6
If you encounter any problem during the loading of the file or you want to
restore the default image, click the Restore Default Images button.
The name of the image file for your corporate logo. Use a gif, jpg or jpeg
image file.
The default is AudioCodes' logo file.
Note: The length of the name of the image file is limited to 48 characters.
Width (in pixels) of the logo image.
The range is 0 - 199. The default value is 141 (which is the width of
AudioCodes' displayed logo).
Note: The optimal setting depends on the screen resolution settings.
[0] = Logo image is used (default).
[1] = Text string used instead of a logo image.
Text string that replaces the logo image.
The string can be up to 15 characters.
When a text string is used instead of a logo image, the Web browser's title bar
displays the string assigned to the WebLogoText parameter.
Description
Description
43
3. Web-Based Management
November 2008
Advertisement
Table of Contents
