Figure 3-80: Tel Profile Settings - AudioCodes Mediant 2000 User Manual
Media sip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
From the 'Silence Suppression' drop-down list, enable or disable the silence
7.
suppression option for the coder you selected.
Repeat steps 3 through 7 for the second to fifth coders (optional).
8.
Repeat steps 2 through 8 for the second to fourth coder groups (optional).
9.
Click the Submit button to save your changes.
10.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230.
11.
3.4.7.5.2 Tel Profile Settings
The 'Tel Profile Settings' page allows you to define up to nine different Tel Profiles. You can
then assign these Tel Profiles to the device's channels (in the 'Trunk Group Table' page),
thereby applying different behaviors to different channels.
Note:
To configure Tel Profiles, take these 9 steps:
Open the 'Tel Profile Settings' page (Configuration tab > Protocol Configuration
1.
menu > Profile Definitions submenu > Tel Profile Settings page item).
SIP User's Manual
You can also configure Tel Profiles using the ini file table parameter TelProfile
(refer to ''SIP Configuration Parameters'' on page 284).
Figure 3-80: Tel Profile Settings Page
192
Mediant 2000
Document #: LTRT-68808
Advertisement
Table of Contents
