AudioCodes Mediant 2000 User Manual page 294

Parameter
EnableHold
HoldFormat
HeldTimeout
EnableForward
EnableCallWaiting
Send180ForCallWaiting
HookFlashCode
UseSIPURIForDiversionHeade
r
RTPOnlyModeForTrunk_ID
RTPOnlyMode
TimeoutBetween100And18x
TransparentCoderPresentatio
n
RxDTMFOption
TxDTMFOption
SIP User's Manual
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
Determines the SIP response code for indicating call waiting.
[0] = Use 182 Queued response to indicate call waiting
(default).
[1] = Use 180 Ringing response to indicate call waiting.
For a description of this parameter, refer to ''Supplementary
Services'' on page 159.
Sets the URI format in the SIP Diversion header.
[0] = 'tel:' (default)
[1] = 'sip:'
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 82.
For a description of this parameter, refer to ''Advanced
Parameters'' on page 151.
Defines the timeout (in msec) between receiving a 100 Trying
response and a subsequent 18x response. If a 18x response is
not received before this timer expires, the call is disconnected.
The valid range is 0 to 32,000. The default value is 0 (i.e., no
timeout).
Determines the format of the Transparent coder representation in
the SDP.
[0] = clearmode (default)
[1] = X-CCD
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 147.
This ini file table parameter determines a single or several (up to
5) preferred transmit DTMF negotiation methods.
The format of this parameter is as follows:
[TxDTMFOption]
FORMAT TxDTMFOption_Index = TxDTMFOption_Type;
[\TxDTMFOption]
For example:
[TxDTMFOption]
TxDTMFOption 0 = 1;
[\TxDTMFOption]
Notes:
DTMF negotiation methods are prioritized according to the
294
Description
Document #: LTRT-68808
Mediant 2000