System Parameters; Table 4-2: System Ini File Parameters - AudioCodes Mediant 2000 User Manual

4.4.2

System Parameters

The system-related ini file configuration parameters are described in the table below.
Parameter
EnableDiagnostics
GWAppDelayTime
ActivityListToLog
SIP User's Manual

Table 4-2: System ini File Parameters

Checks the correct functionality of the different hardware components
on the device. On completion of the check, if the test fails, the device
sends information on the test results of each hardware component to
the Syslog server.
[0] = Rapid and Enhanced self-test mode (default).
[1] = Detailed self-test mode (full test of DSPs, PCM, Switch, LAN,
PHY and Flash).
[2] = A quicker version of the Detailed self-test mode (full test of
DSPs, PCM, Switch, LAN, PHY, but partial test of Flash).
For detailed information, refer to the Product Reference Manual.
For a description of this parameter, refer to ''Advanced Parameters''
on page 151.
The Activity Log mechanism enables the device to send log messages
(to a Syslog server) that report certain types of Web actions according
to a pre-defined filter.
The following filters are available:
[PVC] (Parameters Value Change) = Changes made on-the-fly to
parameters.
[AFL] (Auxiliary Files Loading) = Loading of auxiliary files (e.g., via
'Certificate' screen).
[DR] (Device Reset) = Reset of device via the 'Maintenance
Actions' screen.
[FB] (Flash Memory Burning) = Burning of files / parameters to
flash (in 'Maintenance Actions' screen).
[SWU] (Device Software Update) = cmp loading via the Software
Upgrade Wizard.
[ARD] (Access to Restricted Domains) = Access to Restricted
Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) 'General Security Settings'
(3) 'Configuration File'
(4) 'IPSec/IKE' tables
(5) 'Software Upgrade Key'
(6) 'Internal Firewall'
(7) 'Web Access List'
(8) 'Web User Accounts'
[NAA] (Non Authorized Access) = Attempt to access the Web
interface with a false / empty user name or password.
[SPC] (Sensitive Parameters Value Change) = Changes made to
sensitive parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
268
Description
Document #: LTRT-68808
Mediant 2000