AudioCodes Mediant 2000 User Manual page 265
Media sip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
SIP User's Manual
Parameter
VLANNativeVLANID
VLANOamVLANID
VLANControlVLANID
VLANMediaVLANID
VLANNetworkServiceClas
sPriority
VLANPremiumServiceCla
ssMediaPriority
VLANPremiumServiceCla
ssControlPriority
VlanGoldServiceClassPrio
rity
VLANBronzeServiceClass
Priority
EnableDNSasOAM
EnableNTPasOAM
VLANSendNonTaggedOn
Native
Multiple IPs Parameters
EnableMultipleIPs
LocalMediaIPAddress
LocalMediaSubnetMask
LocalMediaDefaultGW
Version 5.6
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 63.
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 63.
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 63.
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 63.
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 63.
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for DNS services.
VLAN: Determines the traffic type for DNS services.
[1] = OAMP (default)
[0] = Control.
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for NTP services.
VLAN: Determines the traffic type for NTP services.
[1] = OAMP (default)
[0] = Control.
Specify whether to send non-tagged packets on the native VLAN.
[0] = Sends priority tag packets (default).
[1] = Sends regular packets (with no VLAN tag).
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
Note: This parameter is not applicable when configuring multiple
interfaces using the ini file table parameter InterfaceTable.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
For a description of this parameter, refer to ''Configuring the IP
Settings'' on page 50.
265
4. ini File Configuration
Description
November 2008
Advertisement
Table of Contents
