Radius Parameters; Table 4-5: Radius Ini File Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
AccessList_MatchCount
4.4.5

RADIUS Parameters

The RADIUS-related ini file configuration parameters are described in the table below. For
detailed information on the supported RADIUS attributes, refer to ''Supported RADIUS
Attributes'' on page 362.
Parameter
EnableRADIUS
AAAIndications
BehaviorUponRadiusTimeout
MaxRADIUSSessions
SharedSecret
RADIUSRetransmission
RadiusTO
RADIUSAuthServerIP
RADIUSAuthPort
RADIUSAccServerIP
RADIUSAccPort
RadiusAccountingType
DefaultAccessLevel
RadiusLocalCacheMode
RadiusLocalCacheTimeout
Version 5.6
refer to ''Structure of ini File Table Parameters'' on page 257.
For a description of this parameter, refer to ''Configuring the
Firewall Settings'' on page 103.

Table 4-5: RADIUS ini File Parameters

For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 217.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
Number of concurrent calls that can communicate with the RADIUS
server (optional).
The valid range is 0 to 240. The default value is 240.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
Number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
Determines the time interval (measured in seconds) the device
waits for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 217.
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 217.
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 217.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
281
4. ini File Configuration
Description
Description
November 2008