AudioCodes Mediant 2000 User Manual page 277
Media sip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
SIP User's Manual
Parameter
PeerHostNameVerificationMode
VerifyServerCertificate
TLSRemoteSubjectName
OCSPEnable
OCSPServerIP
OCSPServerPort
OCSPDefaultResponse
EnableSecureStartup
SSHAdminKey
SSHRequirePublicKey
IPSec Parameters
EnableIPSec
IPSecDPDMode
IPSEC_SPD_TABLE
Version 5.6
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
Enables or disables certificate checking using Online Certificate
Status Protocol (OCSP).
[0] = Disable (default).
[1] = Enable.
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Defines the OCSP server's TCP port number.
The default port number is 2560.
Determines the default OCSP behavior when the server cannot
be contacted.
[0] = Rejects peer certificate (default).
[1] = Allows peer certificate.
Enables the Secure Startup mode. In this mode, downloading
the *.ini file to the device is restricted to a URL provided in initial
configuration (see parameter IniFileURL) or using DHCP.
[0] Disable (default).
[1] Enable = disables TFTP and allows secure protocols such
as HTTPS to fetch the device configuration.
Note: For a detailed explanation on Secure Startup, refer to the
Product Reference Manual.
Determines the RSA public key for strong authentication to
logging in to the Secure Shell (SSH) interface (if enabled).
The value should be a base64-encoded string. The value can be
a maximum length of 511 characters.
For additional information, refer to the Product Reference
Manual.
Enables or disables RSA public keys for SSH.
[0] = RSA public keys are optional, if a value is configured for
the ini file parameter SSHAdminKey (default).
[1] = RSA public keys are mandatory.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
For a description of this parameter, refer to ''Configuring the
General Security Settings'' on page 109.
This ini file table parameter configures the IPSec SPD table. The
format of this parameter is as follows:
[IPSEC_SPD_TABLE]
277
4. ini File Configuration
Description
November 2008
Advertisement
Table of Contents
