Figure 3-55: Ike Table Listing Loaded Certificate Files - AudioCodes Mediant 2000 User Manual

SIP User's Manual
In the 'Certificates Files' group, click the Browse button corresponding to 'Send Server
7.
Certificate...', navigate to the cert.txt file, and then click Send File.
When the loading of the certificate is complete, save the configuration (refer to ''Saving
8.
Configuration'' on page 230) and restart the device; the Web interface uses the
provided certificate.
Notes:
To apply the loaded certificate for IPsec negotiations, take these 2
steps:
Open the 'IKE Table' page (refer to ''Configuring the IKE Table'' on page 117); the
1.
'Loaded Certificates Files' group lists the newly uploaded certificates, as shown below:
Click the Apply button to load the certificates; future IKE negotiations are now
2.
performed using the new certificates.
Version 5.6
•
The certificate replacement process can be repeated when necessary
(e.g., the new certificate expires).
•
It is possible to use the IP address of the device (e.g., 10.3.3.1) instead of
a qualified DNS name in the Subject Name. This is not recommended
since the IP address is subject to changes and may not uniquely identify
the device.
•
The server certificate can also be loaded via ini file using the parameter
HTTPSCertFileName.

Figure 3-55: IKE Table Listing Loaded Certificate Files

107
3. Web-Based Management
November 2008