Table 7-1: Approximate Amd Detection Sensitivity (Based On North American English) - AudioCodes Mediant 2000 User Manual

The table below shows the success rates of the AMD feature for correctly detecting live and
fax calls:

Table 7-1: Approximate AMD Detection Sensitivity (Based on North American English)

AMD Detection
Sensitivity
0 (Best for
Answering
Machine)
1
2
3 (Default)
4
5
6
7 (Best for Live
Calls)
A pre-requisite for enabling the AMD feature is to set the ini file parameter
EnableDSPIPMDetectors to 1. In addition, to enable voice detection, required once the
AMD detects the answering machine, the ini file parameter EnableVoiceDetection must be
set to 1.
Note:
SIP User's Manual
Success Rate for Live Calls
-
82.56%
85.87%
88.57%
88.94%
90.42%
90.66%
94.72%
The device's AMD feature is based on voice detection for North American
English. If you want to implement AMD in a different language or region, you
must provide AudioCodes with a database of recorded voices in the language
on which the device's AMD mechanism can base its voice detector algorithms
for detecting these voices. The data needed for an accurate calibration should
be recorded under the following guidelines:
•
Statistical accuracy: The number of recordings should be large (i.e.,
about 100) and varied. The calls must be made to different people, at
different times. The calls must be made in the specific location in which
the device's AMD mechanism is to operate.
•
Real-life recording: The recordings should simulate real-life answering of
a person picking up the phone without the caller speaking (until the AMD
decision).
•
Normal environment interferences: The environment should almost
simulate real-life scenarios, i.e., not sterile but not too noisy either.
Interferences, for example, could include background noises of other
people talking, spikes, and car noises.
Performance
Success Rate for Answering Machine
344
Mediant 2000
-
97.10%
96.43%
94.76%
94.31%
91.64%
91.30%
76.14%
Document #: LTRT-68808