AudioCodes Mediant 2000 User Manual page 315

SIP User's Manual
Parameter
AddTrunkGroupAsPrefix
AddPortAsPrefix
ReplaceEmptyDstWithPortNum
ber
CopyDestOnEmptySource
AddNPIandTON2CallingNumbe
r
AddNPIandTON2CalledNumber
UseSourceNumberAsDisplayN
ame
UseDisplayNameAsSourceNum
ber
AlwaysUseRouteTable
Prefix
Version 5.6
[TrunkGroupSettings]
TrunkGroupSettings 0 = 1, 0, 5, audiocodes, user, 1;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2;
[\TrunkGroupSettings]
Notes:
This parameter can include up to 240 indices.
For configuring Trunk Group Settings using the Web
interface, refer to ''Configuring Trunk Group Settings'' on page
197.
For a description on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 171.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 171.
For a description of this parameter, refer to Routing General
Parameters on page 171.
[0] = Leave Source Number empty (default).
[1] = If the Source Number of a Tel-to-IP call is empty, the
Destination Number is copied to the Source Number.
For a description of this parameter, refer to Routing General
Parameters on page 171.
For a description of this parameter, refer to Routing General
Parameters on page 171.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 171.
For a description of this parameter, refer to ''SIP General
Parameters'' on page 121.
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 132.
This ini file table parameter configures the 'Tel to IP Routing'
table for routing Tel-to-IP calls and the 'Outbound IP Routing'
table for IP-to-IP calls. The format of this parameter is as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
[\PREFIX]
For example:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
315
4. ini File Configuration
Description
November 2008