Pstn Settings; Configuring The Trunk Settings - AudioCodes Mediant 2000 User Manual
Media sip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
Parameter
Disable Encryption On
Transmitted RTP Packets
[RTPEncryptionDisableTx]
Disable Encryption On
Transmitted RTCP Packets
[RTCPEncryptionDisableTx]
SRTP Settings
Master Key Identifier (MKI) Size
[SRTPTxPacketMKISize]
3.4.3
PSTN Settings
The PSTN Settings menu allows you to configure various PSTN settings and includes the
following page items:
Trunk Settings (refer to ''Configuring the Trunk Settings'' on page 82)
CAS State Machines (refer to ''Configuring the CAS State Machines'' on page 97)
3.4.3.1
Configuring the Trunk Settings
The 'Trunk Settings' page allows you to configure the device's trunks. For configuring the
trunks using the ini file parameters, refer to ''PSTN Parameters'' on page 303.
To configure the Trunks, take these 7 steps:
Open the 'Trunk Settings' page (Configuration tab > PSTN Settings menu > Trunk
1.
Settings page item).
SIP User's Manual
On a secured RTP session, this parameter determines whether
to enable Encryption on transmitted RTP packets.
[0] Enable (default)
[1] Disable
On a secured RTP session, this parameter determines whether
to enable Encryption on transmitted RTCP packets.
[0] Enable (default)
[1] Disable
Determines the size (in bytes) of the Master Key Identifier (MKI)
in SRTP Tx packets.
The range is 0 to 4. The default value is 0.
82
Description
Document #: LTRT-68808
Mediant 2000
Advertisement
Table of Contents
