AudioCodes Mediant 2000 User Manual page 283

SIP User's Manual
Parameter
SNMP Trap Parameters
SNMPManagerTableIP_x
SNMPManagerTrapPort_x
SNMPManagerTrapUser_x
SNMPManagerIsUsed_x
SNMPManagerTrapSendingE
nable_x
SNMPTrapManagerHostNam
e
SNMP Community String Parameters
SNMPReadOnlyCommunityS
tring_x
SNMPReadWriteCommunityS
tring_x
SNMPTrapCommunityString
SNMP v3 Users Parameters
SNMPUsers
Version 5.6
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 222.
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 222.
This parameter can be set to the name of any configured SNMPV3
user to associate with this trap destination. This determines the
trap format, authentication level, and encryption level. By default,
the trap is associated with the SNMP trap community string.
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 222.
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 222.
For a description of this parameter, refer to ''Configuring the
Management Settings'' on page 220.
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 224.
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 224.
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 224.
This ini file table parameter configures SNMP v3 users. The format
of this parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;
[\SNMPUsers]
For example:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey, SNMPUsers_Group;
SNMPUsers 1 = v3admin1, 1, 0, myauthkey, -, 1;
[\SNMPUsers]
The example above configures user 'v3admin1' with security level
authNoPriv(2), authentication protocol MD5, authentication text
password 'myauthkey', and ReadWriteGroup2.
Notes:
This parameter can include up to 10 indices.
To configure SNMP v3 users through the Web interface and for
a description of the parameters of this ini file table, refer to
''Configuring SNMP V3 Users'' on page 225.
283
4. ini File Configuration
Description
November 2008