AudioCodes Mediant 2000 User Manual page 90

ini File Field Name
Web Parameter Name
[ISDNIBehavior]
SIP User's Manual
Valid Range and Description
button, and then for each required option, select 1 to enable. The
default is 0 (i.e., disable).
[1] NO STATUS ON UNKNOWN IE = Q.931 Status message isn't
sent if Q.931 received message contains an
unknown/unrecognized IE(s). By default, the Status message is
sent.
Note: Applicable only to PRI variants in which sending of Status
message is optional.
[2] NO STATUS ON INV OP IE = Q.931 Status message isn't
sent if an optional IE with invalid content is received. By default,
the Status message is sent.
Note: Applicable only to PRI variants in which sending of Status
message is optional.
[4] ACCEPT UNKNOWN FAC IE = Accepts
unknown/unrecognized Facility IE. Otherwise, the Q.931
message that contains the unknown Facility IE is rejected
(default).
Note: Applicable only to PRI variants where a complete ASN1
decoding is performed on Facility IE.
[128] SEND USER CONNECT ACK = Connect ACK message is
sent in response to received Q.931 Connect. Otherwise, the
Connect ACK is not sent (default).
Note: Applicable only to Euro ISDN User side outgoing calls.
[512] EXPLICIT INTERFACE ID = Enables to configure T1 NFAS
Interface ID (refer to the parameter ISDNNFASInterfaceID_x).
Note: Applicable to 4/5ESS, DMS, NI-2 and HKT variants.
[2048] ALWAYS EXPLICIT = Always set the Channel
Identification IE to explicit Interface ID, even if the B-channel is on
the same trunk as the D-channel.
Note: Applicable to 4/5ESS, DMS and NI-2 variants.
[32768] ACCEPT MU LAW =Mu-Law is also accepted in ETSI.
[65536] EXPLICIT PRES SCREENING = The calling party
number (octet 3a) is always present even when presentation and
screening are at their default.
Note: Applicable only to ETSI, NI-2, and 5ESS.
[131072] STATUS INCOMPATIBLE STATE = Clears the call on
receipt of Q.931 Status with incompatible state. Otherwise, no
action is taken (default).
[262144] STATUS ERROR CAUSE = Clear call on receipt of
STATUS according to cause value.
[524288] ACCEPT A LAW =A-Law is also accepted in 5ESS.
[2097152] RESTART INDICATION
=acEV_PSTN_RESTART_CONFIRM is generated on receipt of a
RESTART message.
[4194304] FORCED RESTART = On data link (re)initialization,
send RESTART if there is no call.
[1073741824] NS QSI ENCODE INTEGER = If this bit is set,
INTEGER ASN.1 type is used in operator coding (compliant to
new ECMA standards); otherwise, OBJECT IDENTIFIER ASN.1
type is used.
Note: Only applicable only to QSIG.
90
Mediant 2000
Document #: LTRT-68808