Check Points Of Every 200 Hours - Kubota WSM STV32 Workshop Manual

STV32 · STV36 · STV40, WSM

[5] CHECK POINTS OF EVERY 200 HOURS

Replacing Engine Oil Filter Cartridge
1. See page G-14.
Replacing Hydraulic Oil Filter Cartridge
1. See page G-16.
Checking Radiator Hose and Hose Clamp
Check to see if radiator hoses are properly fixed every 200
hours of operation or six months, whichever comes first.
1. If hose clamps (2) are loose or water leaks, tighten hose
clamps (2) securely.
2. Replace hoses (1) and tighten hose clamps (2) securely, if
radiator hoses (1) are swollen, hardened or cracked.
Replace hoses and hose clamps every 2 years or earlier if
checked and found that hoses are swollen, hardened or
cracked.
B Precaution at Overheating
Take the following actions in the event the coolant temperature
be nearly or more than the boiling point, what is called
"Overheating".
1. Stop the machine operation in a safe place and keep the
engine unloaded idling.
2. Don't stop the engine suddenly, but stop it after about 5
minutes of unloaded idling.
3. Keep yourself well away from the machine for further 10
minutes or while the steam blown out.
4. Checking that there gets no danger such as burn, get rid of the
causes of overheating according to the manual, see
"TROUBLESHOOTING" section, and then start again the
engine.
(1) Radiator Hose
G-27
GENERAL
0000007988E
0000007989E
(2) Clamp
0000005093E
KiSC issued 04, 2006 A