Kubota WSM STV32 Workshop Manual page 105

STV32 · STV36 · STV40, WSM
Governor Springs and Speed Control Plate (Continued)
1. Set the speed control lever (1) as the figure.
2. Take out the speed control plate (2) with care not to let the
large (3) and small (4) governor springs come off this plate and
fall into the gear case.
(1) Speed Control Lever
(2) Speed Control Plate
(3) Large Governor Spring
1-S33
ENGINE
(4) Small Governor Spring
(5) Specific Tool
0000007501E
KiSC issued 04, 2006 A