Kubota WSM STV32 Workshop Manual page 191

STV32 · STV36 · STV40, WSM
Fuel Tank
1. Disconnect the connector from the glow lamp timer (3).
2. Pull out the clamp (1) and separate the fuse box (2) from the
shutter plate (11).
3. Disconnect the overflow hoses (4) from the fuel tank.
4. Separate the fuel hose (7) from the fuel filter to drain fuel.
5. Disconnect the connectors from the PTO relay (8) and flasher
unit (10), and remove the plate (9) with the PTO relay (8) and
flasher unit (10).
6. Remove the clamps (16) from the bonnet rear support (15).
7. Remove the bracket (6) (13), screws (5) (14) and nuts (17).
8. Remove the fuel tank (12) with the bonnet rear support (15)
and shutter plate (11).
(When reassembling)
Engine mounting M12
Tightening torque
nut (17)
(1) Clamp
(2) Fuse Box
(3) Glow Lamp Timer
(4) Overflow Hoses
(5) Screw
(6) Bracket
(7) Fuse Hose
(8) PTO Relay
(9) Plate
3-S20
TRANSMISSION
77.5 to 90.2
7.9 to 9.2
57.2 to 66.5 ft-lbs
(10) Flasher Unit
(11) Shutter Plate
(12) Fuel Tank
(13) Bracket
(14) Screw
(15) Bonnet Rear Support
(16) Clamps
(17) Engine Mounting M12 Nut
0000007538E
KiSC issued 04, 2006 A