Check Points Of Every 100 Hours - Kubota WSM STV32 Workshop Manual

STV32 · STV36 · STV40, WSM

[4] CHECK POINTS OF EVERY 100 HOURS

Checking Wheel Mounting Screws and Nuts Tightening Torque
A Never operate tractor with a loose rim, wheel or axle.
A Any time screws and nuts are loosened, retighten to
specified torque.
A Check all screws and nuts frequently and keep them tight.
1. Check the wheel mounting screws and nuts regularly
especially when new. If there are loosened, tighten as follows.
Front wheel mounting
screw and nut
Tightening torque
Rear wheel mounting
screw and nut
(1) Front Wheel Mounting Screw
and Nut
Changing Engine Oil
1. See page G-13.
Checking Clutch Pedal Free Travel
1. See page G-17.
G-20
GENERAL
85
9.0
65.1 ft-lbs
215
22.0
159.1 ft-lbs
(2) Rear Wheel Mounting Screw
and Nut
0000007976E
0000007977E
0000007978E
KiSC issued 04, 2006 A