Disassembling And Assembling - Kubota WSM STV32 Workshop Manual

STV32 · STV36 · STV40, WSM

[2] DISASSEMBLING AND ASSEMBLING

Parking Brake Lever Free Travel
1. Support the rear axle with the disassembling stand to separate
the rear wheels from the ground.
2. Shift the range gear shift lever to the neutral position, and
disengage the front wheel drive lever.
3. Raise the parking brake lever (1) until the ratchet sound is
heard once.
4. Check right and left rear wheels. Right and left rear wheels
should be free.
5. Next, raise the parking brake lever (1) until the ratchet sound
is heard twice.
6. Check right and left rear wheels. Right and left rear wheels
should be locked.
7. If it is not, adjust with the parking brake rod 2 (2).
Parking brake lever free
Factory spec.
travel
A Check the brake pedal free travel after adjusting the
parking brake.
(1) Parking Brake Lever
Removing Brake Pedal
Refer to "PREPARATION" section of 3. TRANSMISSION (3-
S28).
Separating Brake (Rear Axle)
Refer to "PREPARATION" section of 3. TRANSMISSION (3-
S33).
5-S4
BRAKES
The brake works when the
lever is raised until the
ratchet sound is heard
twice
(2) Parking Brake Rod 2 (Left)
0000007610E
0000007611E
0000007612E
KiSC issued 04, 2006 A